Click to enlarge
Previous product
Double Support Table
Back to products
Next product
Bucking Unit 40,000 Nm

Workbench 2000

The Koller workbenches have been designed to make and break screwed connections with high torques.

To accommodate the high torsional forces, the workbenches have extremely stable and torsionally rigid frames.

All available workbench equipment is equipped with dovetail mounting plates and are stepless slidable and positionable as well as turnable for 180 degrees in the bench.

Categories: , , Industries: , ,
Description
  • Air-driven hydraulic power pack with maintenance unit
  • Working pressure continuously adjustable and visible on a gauge
  • Removable drip trays for liquids with drain valve
  • Well dimensioned trays for tools and small parts
  • Feet with bore holes for floor mounting
  • Optional base plate if floor mounting is impossible

Infographic with technical details

Specifications

Specifications

Downloads

Downloads

Here you can download more information about workbenches as well as the Workshop Equipment catalogue.

Related products

Close

2-split Offshore Wireline Unit

The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a fault analytic system. The optional available battery startup makes the system independent of any external power supply.
Close

Trolley 30-200 short

Trolleys are used for cranless assembly, disassembly and transport of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable and for different tool lengths, the center bar is stepless extendable. To allow working in an ergonomic position, the height of the trolley can be adjusted. Each trolley is grounded and can be used in ESD (electrostatic discharge) environments out of the box. A turnable tray for tooling equipment is optional available.
Hot
Close

Hydro Vice 220 kN

The hydraulic vice have been designed for short-term clamping of downhole tools or other cylindrical workpieces. The 3-point clamping is carried out via a manual spindle and a hydraulically operated prism. The spindle is turned down to the diameter of the workpiece. Then the required clamping force is generated by the hydraulic lifting of the prism. The prism is equipped with specially textured jaws that effectively prevent the workpiece from rotating.
Workbench-1700-1
Workbench-1700-4
Close

Workbench 1700

The Koller workbenches have been designed to make and break screwed connections with high torques. To accommodate the high torsional forces, the workbenches have extremely stable and torsionally rigid frames. All available workbench equipment is equipped with dovetail mounting plates and are stepless slidable and positionable as well as turnable for 180 degrees in the bench.
Close

Trolley 50-200 long / 50-200 see specifications

Trolleys are used for cranless assembly, disassembly and transport of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable and for different tool lengths, the center bar is stepless extendable. To allow working in an ergonomic position, the height of the trolley can be adjusted. Each trolley is grounded and can be used in ESD (electrostatic discharge) environments out of the box. A turnable tray for tooling equipment is optional available.
Close

3-split Offshore Wireline Unit

The KOLLER 3-split Offshore Wireline Unit has been designed for measurements and workover activities with wire capacities above 7,650 m  /  25,000 ft. The 3-skid layout is separated in a winch, an operators and a hydraulic power pack container. The hydraulic pump / motor combination guarantees high pull force and speed at any depth.
Close

Bucking Unit 18,500 Nm

The bucking unit have been designed to make and break screwed connections with high torques. The unit is a combination of a KOLLER hydraulic vice 220 kN and a hydraulic operated chain tong. For the basic unit without electronic data logger, no electrical supply is required. Both, the hydraulic vice and the tong are supplied by pressure air driven hydraulic power packs. Since the bucking unit is mounted on a solid steel frame with forklift truck pockets, it is transport friendly and can be moved easily on site.
mechanical-engineering-customized-solutions-1
mechanical-engineering-customized-solutions-2
Close

Customized Solutions

Focusing on our core competence mechanical engineering, we have successfully planed, assembled and created a variety of customized solutions over the years. Supporting clients with started projects has also been part of our portfolio.