Here you can download more information about workbenches as well as the Workshop Equipment catalogue.
Workbench 2000
The Koller workbenches have been designed to make and break screwed connections with high torques.
To accommodate the high torsional forces, the workbenches have extremely stable and torsionally rigid frames.
All available workbench equipment is equipped with dovetail mounting plates and are stepless slidable and positionable as well as turnable for 180 degrees in the bench.
Beschreibung
- Air-driven hydraulic power pack with maintenance unit
- Working pressure continuously adjustable and visible on a gauge
- Removable drip trays for liquids with drain valve
- Well dimensioned trays for tools and small parts
- Feet with bore holes for floor mounting
- Optional base plate if floor mounting is impossible
Specifications
Specifications
Ähnliche Produkte
3-split Offshore Wireline Unit
The KOLLER 3-split Offshore Wireline Unit has been designed for measurements and workover activities with wire capacities above 7,650 m / 25,000 ft. The 3-skid layout is separated in a winch, an operators and a hydraulic power pack container. The hydraulic pump / motor combination guarantees high pull force and speed at any depth.
Lightweight Wireline Unit
The KOLLER Lightweight Wireline Unit has been designed for workover activities with wire capacities above 7,650 m / 25,000 ft. The 2-skid layout is separated in a winch / operators container and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The startup by spring starter makes the system independent of any external power supply.
Mobile heavy duty Double Workover Rig 90 tons
- SISU heavy duty truck with Caterpillar engine, 10x10 drive for extreme off-road capabilities
- road approval (Germany, Romania) dimensions and weight within the permitted legal limits for special trucks
- 6 hydraulical supports, mechanically locked
- 90 tons hook load
- drawworks with closed-loop cooling and API 7K monogram
- sand-line drum for 3000 m working depth (higher depths possible)
- powerful hydraulic by truck engine via Allison transmission 4700 OFS
- mast with automatic lock in end position (retracted and extended) and API 4F monogram
- electric safety according to EN 60204
- automatically uplifting working platform while mast telescoping
- stairs foldable for transport
- store capacity for 140 double tubings up to 31/2“
- turning circle under < 20 m
- working temperature range -29°C / +45°C (+55°C for special operations)
Slickline Alu Unit
The KOLLER Slickline Alu Unit has been designed for workover activities with special weight restrictions.
The 2-skid layout is separated in a winch / operators module and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The unit starts with a spring-starter which makes the system independent of any external power supply.
The modular system is very flexible enabling a set up with or without cabin. Not using the cabin, more or larger wire can be spooled before the weight restrictions will be executed.
Stand 10-350 non-mag
Stands are used for cranless assembly, disassembly and storing of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable. To allow working in an ergonomic position, the height of the stands can be adjusted. Except type 15-350 non-mag, all stands are fitted with transport rollers for move them without load.
Trolley 30-200 short
Trolleys are used for cranless assembly, disassembly and transport of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable and for different tool lengths, the center bar is stepless extendable. To allow working in an ergonomic position, the height of the trolley can be adjusted. Each trolley is grounded and can be used in ESD (electrostatic discharge) environments out of the box. A turnable tray for tooling equipment is optional available.
Trolley 50-200 long / 50-200 see specifications
Trolleys are used for cranless assembly, disassembly and transport of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable and for different tool lengths, the center bar is stepless extendable. To allow working in an ergonomic position, the height of the trolley can be adjusted. Each trolley is grounded and can be used in ESD (electrostatic discharge) environments out of the box. A turnable tray for tooling equipment is optional available.