Click to enlarge
Previous product
Trolley 50-200 long / 50-200 see specifications
Back to products
Next product
Offshore Wireline Unit

Wheelchair Swing

  • Specially designed for people in wheelchairs
  • The swing can be used with your own wheelchair (no need to lift it out)
  • Stable and safe construction
  • Certified safety according to: DIN EN 1176-1 & DIN EN 1176-2
  • Gentle, even and steady rocking
  • Safe handling
  • Calming effect
  • Conveys joy of living
Category: Industries: ,
Description

Application areas

  • Facilities for disabled people
  • Playgrounds
  • Therapeutic and care facilities
  • Schools and kindergartens
  • For children (from 6 years) and adults
  • By choosing a location, it is important to ensure that there is a minimum of 2 m of free space around the swing
Specifications

Specifications

Downloads

Downloads

Here you can download the Wheelchair Swing catalogue.

Related products

Close

Bucking Unit 40,000 Nm

The bucking unit has been designed to make and break screwed connections with high torques. The unit is a combination of a KOLLER hydraulic vice 220 kN and a hydraulic operated chain tong. For the basic unit without electronic data logger, no electrical supply is required. Both, the hydraulic vice and the tong are supplied by pressure air driven hydraulic power packs. Since the bucking unit is mounted on a solid steel frame with forklift truck pockets, it is transport friendly and can be moved easily on site.
Quick view
Workbench-1700-1
Workbench-1700-4
Close

Workbench 1700

The Koller workbenches have been designed to make and break screwed connections with high torques. To accommodate the high torsional forces, the workbenches have extremely stable and torsionally rigid frames. All available workbench equipment is equipped with dovetail mounting plates and are stepless slidable and positionable as well as turnable for 180 degrees in the bench.
Quick view
Close

Stand 15-200 / 15-300 see specifications

Stands are used for cranless assembly, disassembly and storing of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable. To allow working in an ergonomic position, the height of the stands can be adjusted. Except type 15-350 non-mag, all stands are fitted with transport rollers for move them without load.
Quick view
Close

Trolley 50-200 long / 50-200 see specifications

Trolleys are used for cranless assembly, disassembly and transport of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable and for different tool lengths, the center bar is stepless extendable. To allow working in an ergonomic position, the height of the trolley can be adjusted. Each trolley is grounded and can be used in ESD (electrostatic discharge) environments out of the box. A turnable tray for tooling equipment is optional available.
Quick view
Close

Washing Plant L-700

The KOLLER Washing Plant L700 is used for degreasing and cleaning of parts or tools. Two programs are available, automatic and manual. For manual cleaning by hand brush the washing table will be lifted to an ergonomic working height. The KOLLER Washing Plant L700 is especially designed environmentally friendly. During the cleaning process the fluid is continuously circulated, filtered and at the end oxygenated with a separate oxygen pump. Therefore its liftime is very long.
Quick view
Close

Stand 10-350 non-mag

Stands are used for cranless assembly, disassembly and storing of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable. To allow working in an ergonomic position, the height of the stands can be adjusted. Except type 15-350 non-mag, all stands are fitted with transport rollers for move them without load.
Quick view
Close

Stand 50-350 / 30-200 see specifications

Stands are used for cranless assembly, disassembly and storing of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable. To allow working in an ergonomic position, the height of the stands can be adjusted. Except type 15-350 non-mag, all stands are fitted with transport rollers for move them without load.
Quick view
Close

Bucking Unit 18,500 Nm

The bucking unit have been designed to make and break screwed connections with high torques. The unit is a combination of a KOLLER hydraulic vice 220 kN and a hydraulic operated chain tong. For the basic unit without electronic data logger, no electrical supply is required. Both, the hydraulic vice and the tong are supplied by pressure air driven hydraulic power packs. Since the bucking unit is mounted on a solid steel frame with forklift truck pockets, it is transport friendly and can be moved easily on site.
Quick view