Washing Plant L-700
The KOLLER Washing Plant L700 is used for degreasing and cleaning of parts or tools.
Two programs are available, automatic and manual.
For manual cleaning by hand brush the washing table will be lifted to an ergonomic working height.
The KOLLER Washing Plant L700 is especially designed environmentally friendly. During the cleaning process the fluid is continuously circulated, filtered and at the end oxygenated with a separate oxygen pump. Therefore its liftime is very long.
Description
- Two programs available:
- Automatic (oscillation) washing-table drives up and down
- Manually (cleaning brush)
- Two control panels for electric and pneumatics
- Economical and maintenance-friendly design
- Construction and assembling according to machinery directive 2006/42/EC
- Electrical installations according to low voltage directive 2006/95/EC
Specifications
Specifications
Related products
Laydown frame
A perfect tool to ensure safe core samples extraction from the core string on surface. The frame allows to lay down the core samples horizontally without damage, for example directly from the rig floor onto the catwalk. The frame can also be coupled directly to the Core Saw for the core samples to be cut into transportable pieces with protective tube using the saw.
Lightweight Wireline Unit
The KOLLER Lightweight Wireline Unit has been designed for workover activities with wire capacities above 7,650 m / 25,000 ft. The 2-skid layout is separated in a winch / operators container and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The startup by spring starter makes the system independent of any external power supply.
Mobile heavy duty Double Workover Rig 90 tons
- SISU heavy duty truck with Caterpillar engine, 10x10 drive for extreme off-road capabilities
- road approval (Germany, Romania) dimensions and weight within the permitted legal limits for special trucks
- 6 hydraulical supports, mechanically locked
- 90 tons hook load
- drawworks with closed-loop cooling and API 7K monogram
- sand-line drum for 3000 m working depth (higher depths possible)
- powerful hydraulic by truck engine via Allison transmission 4700 OFS
- mast with automatic lock in end position (retracted and extended) and API 4F monogram
- electric safety according to EN 60204
- automatically uplifting working platform while mast telescoping
- stairs foldable for transport
- store capacity for 140 double tubings up to 31/2“
- turning circle under < 20 m
- working temperature range -29°C / +45°C (+55°C for special operations)
Offshore Wireline Unit
The KOLLER Offshore Wireline Unit has been designed for measurements and workover activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a fault analytic system. The optional available battery startup makes the system independent of any external power supply.
Slickline Alu Unit
The KOLLER Slickline Alu Unit has been designed for workover activities with special weight restrictions.
The 2-skid layout is separated in a winch / operators module and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The unit starts with a spring-starter which makes the system independent of any external power supply.
The modular system is very flexible enabling a set up with or without cabin. Not using the cabin, more or larger wire can be spooled before the weight restrictions will be executed.
Stand 10-350 non-mag
Stands are used for cranless assembly, disassembly and storing of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable. To allow working in an ergonomic position, the height of the stands can be adjusted. Except type 15-350 non-mag, all stands are fitted with transport rollers for move them without load.
Stand 50-350 / 30-200 see specifications
Stands are used for cranless assembly, disassembly and storing of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable. To allow working in an ergonomic position, the height of the stands can be adjusted. Except type 15-350 non-mag, all stands are fitted with transport rollers for move them without load.
