Click to enlarge
Previous product
Trolley 30-200 long
Back to products
Next product
Wheelchair Swing

Trolley 50-200 long / 50-200 see specifications

Trolleys are used for cranless assembly, disassembly and transport of downhole tools or other cylindric parts.

For different tool diameters, the distance between the support rollers is adjustable and for different tool lengths, the center bar is stepless extendable. To allow working in an ergonomic position, the height of the trolley can be adjusted.

Each trolley is grounded and can be used in ESD (electrostatic discharge) environments out of the box.

A turnable tray for tooling equipment is optional available.

Categories: , , Industries: , ,
Description

Trolley profile

  • Very good maneuverable by steerable wheels
  • Secure strap for fastening tool or workpiece
  • To prevent unintentional rotating, the support rollers are arrestable.
  • Guide wheels with park brakes and steering arresters
  • Also movable under load
  • Bumper guards on both sides
  • Hand crank for height adjustment removable
  • Battery-operated electric tractor with radio remote control optional available
Specifications

Specifications

Downloads

Downloads

Here you can download the workshop equipment catalogue.

Related products

Close

Stand 50-350 / 30-200 see specifications

Stands are used for cranless assembly, disassembly and storing of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable. To allow working in an ergonomic position, the height of the stands can be adjusted. Except type 15-350 non-mag, all stands are fitted with transport rollers for move them without load.
Close

Workbench 2000

The Koller workbenches have been designed to make and break screwed connections with high torques. To accommodate the high torsional forces, the workbenches have extremely stable and torsionally rigid frames. All available workbench equipment is equipped with dovetail mounting plates and are stepless slidable and positionable as well as turnable for 180 degrees in the bench.
Close

Bucking Unit 40,000 Nm

The bucking unit has been designed to make and break screwed connections with high torques. The unit is a combination of a KOLLER hydraulic vice 220 kN and a hydraulic operated chain tong. For the basic unit without electronic data logger, no electrical supply is required. Both, the hydraulic vice and the tong are supplied by pressure air driven hydraulic power packs. Since the bucking unit is mounted on a solid steel frame with forklift truck pockets, it is transport friendly and can be moved easily on site.
Close

Lightweight Wireline Unit

The KOLLER Lightweight Wireline Unit has been designed for workover activities with wire capacities above 7,650 m  /  25,000 ft. The 2-skid layout is separated in a winch / operators container and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The startup by spring starter makes the system independent of any external power supply.
Close

Trolley 30-200 short

Trolleys are used for cranless assembly, disassembly and transport of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable and for different tool lengths, the center bar is stepless extendable. To allow working in an ergonomic position, the height of the trolley can be adjusted. Each trolley is grounded and can be used in ESD (electrostatic discharge) environments out of the box. A turnable tray for tooling equipment is optional available.
Close

Wheelchair Swing

  • Specially designed for people in wheelchairs
  • The swing can be used with your own wheelchair (no need to lift it out)
  • Stable and safe construction
  • Certified safety according to: DIN EN 1176-1 & DIN EN 1176-2
  • Gentle, even and steady rocking
  • Safe handling
  • Calming effect
  • Conveys joy of living
Hot
Close

Offshore Wireline Unit

The KOLLER Offshore Wireline Unit has been designed for measurements and workover activities with wire capacities above 7,650 m  /  25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a fault analytic system. The optional available battery startup makes the system independent of any external power supply.
Close

Washing Plant L-700

The KOLLER Washing Plant L700 is used for degreasing and cleaning of parts or tools. Two programs are available, automatic and manual. For manual cleaning by hand brush the washing table will be lifted to an ergonomic working height. The KOLLER Washing Plant L700 is especially designed environmentally friendly. During the cleaning process the fluid is continuously circulated, filtered and at the end oxygenated with a separate oxygen pump. Therefore its liftime is very long.