Bucking Unit 18,500 Nm
The bucking unit have been designed to make and break screwed connections with high torques. The unit is a combination of a KOLLER hydraulic vice 220 kN and a hydraulic operated chain tong.
For the basic unit without electronic data logger, no electrical supply is required. Both, the hydraulic vice and the tong are supplied by pressure air driven hydraulic power packs.
Since the bucking unit is mounted on a solid steel frame with forklift truck pockets, it is transport friendly and can be moved easily on site.
Beschreibung
- Air drive hydraulic power pack with foot pedal operation by Enerpac
- Two versions available, 18,500 Nm and 30,000 Nm
- Loading by crane from top (no sideward loading)
- Tongs laterally adjustable via slider
- Height-adjustable stand for horizontal alignment of the tool
- Rotatable auxiliary crane for moving the chain tong from screwing to loosening
- CE declaration according to EC machinery directive 2006/42/EC
Specifications
Specifications
Options
Ähnliche Produkte
3-split Offshore Wireline Unit
The KOLLER 3-split Offshore Wireline Unit has been designed for measurements and workover activities with wire capacities above 7,650 m / 25,000 ft. The 3-skid layout is separated in a winch, an operators and a hydraulic power pack container. The hydraulic pump / motor combination guarantees high pull force and speed at any depth.
Laydown frame
A perfect tool to ensure safe core samples extraction from the core string on surface. The frame allows to lay down the core samples horizontally without damage, for example directly from the rig floor onto the catwalk. The frame can also be coupled directly to the Core Saw for the core samples to be cut into transportable pieces with protective tube using the saw.
Stand 15-350 non-mag
Stands are used for cranless assembly, disassembly and storing of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable. To allow working in an ergonomic position, the height of the stands can be adjusted. Except type 15-350 non-mag, all stands are fitted with transport rollers for move them without load.
Trolley 30-200
Trolleys are used for cranless assembly, disassembly and transport of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable and for different tool lengths, the center bar is stepless extendable. To allow working in an ergonomic position, the height of the trolley can be adjusted. Each trolley is grounded and can be used in ESD (electrostatic discharge) environments out of the box. A turnable tray for tooling equipment is optional available.
Trolley 30-200 short
Trolleys are used for cranless assembly, disassembly and transport of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable and for different tool lengths, the center bar is stepless extendable. To allow working in an ergonomic position, the height of the trolley can be adjusted. Each trolley is grounded and can be used in ESD (electrostatic discharge) environments out of the box. A turnable tray for tooling equipment is optional available.
Washing Plant L-700
The KOLLER Washing Plant L700 is used for degreasing and cleaning of parts or tools. Two programs are available, automatic and manual. For manual cleaning by hand brush the washing table will be lifted to an ergonomic working height. The KOLLER Washing Plant L700 is especially designed environmentally friendly. During the cleaning process the fluid is continuously circulated, filtered and at the end oxygenated with a separate oxygen pump. Therefore its liftime is very long.
Workbench 1700
The Koller workbenches have been designed to make and break screwed connections with high torques. To accommodate the high torsional forces, the workbenches have extremely stable and torsionally rigid frames. All available workbench equipment is equipped with dovetail mounting plates and are stepless slidable and positionable as well as turnable for 180 degrees in the bench.
Workbench 2000
The Koller workbenches have been designed to make and break screwed connections with high torques. To accommodate the high torsional forces, the workbenches have extremely stable and torsionally rigid frames. All available workbench equipment is equipped with dovetail mounting plates and are stepless slidable and positionable as well as turnable for 180 degrees in the bench.
