Aluminum 70 ft Articulated Mast for Slickline and Wireline

  • Profile
  • Technical data
  • Media & Downloads

The KOLLER Aluminum Articulated Mast has been designed to support slickline and wireline well intervention.

The support of rig up, rig down and operational forces are the main purpose of the mast. One main and two auxiliary winches assist the operator by lifting pressure control equipment. The slickline wire or the wireline cable can be taken
by the mast top sheave, by a separate top sheave lifted by one auxiliary winch or by a top sheave mounted on top of the PCE.

The lightweight aluminum design allows helicopter transports and lowcapacity crane lifts. A hydraulic rig up and rig downof the mast makes the mast operation easy for thecrew.

  • Aluminum lattice mast design
  • DNVGL-ST-0378 certificate for “Standard for offshore and platform lifting appliances” (former DNV 2.22)
  • DNVGL-ST-E273 certificate for “Portable offshore units” (former DNV 2.7-3; Class R30 for 3 m wave height)
  • 6,500 lbs / 3.000 kg hydraulic main winch (with dual line block; 2,800 lbs / 1.300 kg single line lift)
  • 1,100 lbs / 500 kg hydraulic auxiliary winch (with dual line block; 550 lbs / 250 kg single line lift)
  • 220 lbs / 100 kg manual auxiliary winch
  • Hydraulic controls
  • Hydraulic supply by separate power pack or by KOLLER winch power pack
  • Foldable outriggers for mast support

Options

  • Machinery Directive 2006/42/CE declaration of conformity
  • ATEx 2014/34/EU, Zone I declaration of conformity
  • 45 ft and 90 ft mast heights
  • Hydraulic second auxiliary winch
  • Jacking wheels

Specifications

Max. Slickline / Wireline pull 2,700 kg / 6,000 lbs
Safe total mast load 5,450 kg / 12,000 lbs
Hydr. main winch capacity
single line pull
dual line pull
1,300 kg / 2,800 lbs
2,950 kg / 6,500 lbs
Hydr. auxiliary winch capacity
single line pull
dual line pull
250 kg / 550 lbs
500 kg / 1,100 lbs
Manual auxiliary winch capacity 100 kg / 220 lbs
Max. wind speeds
guyed
not guyed
rig up / down
60 mph / 27 m/s / 96 km/h / 52 Knots
30 mph / 13 m/s / 47 km/h / 39 Knots
25 mph / 11 m/s / 40 km/h / 21 Knots
Temperature range -20 / 50°C / -4 / 122°F

Operation dimensions

Length incl. outriggers 6,700 mm / 21.98 ft
Width incl. outriggers 5,100 mm / 16.73 ft
Height 21,900 mm / 79.50 ft
Height PCE 19,800 mm / 65.00 ft
(from ground to hook incl. 1,000 mm / 3.28 ft lift)
Max. mast reach 1,020 mm / 3.90 ft
(from mast base structure to PCE center line)

Transport dimensions

Length 7,800 mm / 25.60 ft
Width 1,530 mm / 5.00 ft
Height 1,940 mm / 1.94 ft
Weight
without auxiliary equipment
with auxiliary equipment
(sheaves, guy wires, etc.)
1,500 kg / 3,300 lbs
1,620 kg / 3,570 lbs

Hydraulic supply required

Pressure 210 bar / 3,000 psi
Flow rate 40 l/min / 10.5 USGal/min

Downloads

application/pdf Wireline Mast

Go back