Batch Mixer

  • Profile
  • Technical data
  • Media & Downloads

The KOLLER Batch Mixer is used to manufacture cement mixes in ready-to-use batches.

The batch tank required for this is subdivided into two chambers, one with a capacity of 20 m³, and one with a capacity of 10 m³.

If bagged goods are being used, the media are fed in via a hopper attached to the batch tank in the circulation line; if loose bulk material is being used, the media are fed in via bulk connections or tank truck connections on the batch tank.

  • integrated power generator – no need for an external power supply
  • three agitators
  • discharge in the tank floor – easy to clean manually
  • four lights
  • centrifugal pump for circulation and conveyance with suitable pipelines
  • forklift pockets and eye bolts
  • twist lock mechanism

Dimensions

Total length 12,759 mm / 41.8 ft
Width transport 2,540 mm / 8.33 ft
Width operation 3,095 mm / 10.15 ft
Height transport approx. 3,950 mm / 12.96 ft
Height operation approx. 4,155 / 13.63 ft
Empty weight 11,692 kg / 25,776 lbs

Electrical connection power

Mixer 1-3 3 x 22 kW
Centrifugal pump 30 kW

Tank volumes

Batch tank  
Chamber 1 20 m³ / 706 ft³
Chamber 2 10 m³ / 353 ft³

Connections

Bulk line 2 x 4 in
Water line 1 in
Water line for hopper 2 in
Water line for tank 20 m³ 2 in
Emptying of chambers 2 x 4 in
Removal of samples 2 x 2 in
Hopper bulk line 6 in
Tank truck connection 2 x 3 in
Max. operating pressure of the pipelines 5 bar
Range of ambient +5 / +40 °C

Downloads

application/pdf Batch Mixer

Go back