Wireline Spooling Stand

  • Profile
  • Technical data
  • Media & Downloads

The Koller spooling stand can be used to spool and
unspool cable from a drum mounted in the Spooling Unit
or a Wireline Unit. To maintain the tension on the wire is winded around two large capstan wheels.

Dimesions

Length mm / ft 6,010 / 19.72
Width mm / ft 2,230 / 7 .32
Height mm/ft 2,060 / 6.76
Weight kg/lbs
(depending on chassis and equipment)
3,850 / 8,487.79

Data in tensioning mode (with ATS = automatic tensioning system)

Maximum tensioning force daN 4,000
Speed m/min | ft/min 90 | 295
Speed m/min | ft/min
(at maximum tensioning force)
90 | 295
Minimum tensioning force with ATS daN Approx. 400

Data in pulling mode

Maximum pulling force daN 4,000
Maximum speed m/min | ft/min 90 | 295
at 400 daN pulling force
Speed at maximum
pulling force
20|66
   

Data wheel drive

Grooved wheel diameter mm/in 1,400 / 55,12
Groove diameter mm/in 15 / 0,59
Number of grooves 5

Electric motor

Power supply VAC|A 400|3*125
Frequency Hz 50
Speed 1/min 1,475
Power kW 15

Drum stand

Drum diameter max mm/in 1,800/70,87
Drum width. max. mm/in 1,440/56,69
Drum weight max kg/lbs 6,000/13,227
Drum borehole mm/in 80 - 125 /
3,15 - 4,92

Rope

Diameter max. mm/in 12,5 / 0,49
Go back