Click to enlarge
Previous product
Trolley 30-200 long
Back to products
Next product
Rollstuhlschaukel

Trolley 50-200 long / 50-200 see specifications

Trolleys are used for cranless assembly, disassembly and transport of downhole tools or other cylindric parts.

For different tool diameters, the distance between the support rollers is adjustable and for different tool lengths, the center bar is stepless extendable. To allow working in an ergonomic position, the height of the trolley can be adjusted.

Each trolley is grounded and can be used in ESD (electrostatic discharge) environments out of the box.

A turnable tray for tooling equipment is optional available.

Kategorien: , , Branchen: , ,
Beschreibung

Trolley profile

  • Very good maneuverable by steerable wheels
  • Secure strap for fastening tool or workpiece
  • To prevent unintentional rotating, the support rollers are arrestable.
  • Guide wheels with park brakes and steering arresters
  • Also movable under load
  • Bumper guards on both sides
  • Hand crank for height adjustment removable
  • Battery-operated electric tractor with radio remote control optional available
Specifications

Specifications

Downloads

Downloads

Here you can download the workshop equipment catalogue.

Ähnliche Produkte

Schließen

Stand 15-350 non-mag

Stands are used for cranless assembly, disassembly and storing of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable. To allow working in an ergonomic position, the height of the stands can be adjusted. Except type 15-350 non-mag, all stands are fitted with transport rollers for move them without load.
Schnellansicht
Schließen

Trolley 30-200 short

Trolleys are used for cranless assembly, disassembly and transport of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable and for different tool lengths, the center bar is stepless extendable. To allow working in an ergonomic position, the height of the trolley can be adjusted. Each trolley is grounded and can be used in ESD (electrostatic discharge) environments out of the box. A turnable tray for tooling equipment is optional available.
Schnellansicht
Hot
Schließen

Offshore Wireline Unit

The KOLLER Offshore Wireline Unit has been designed for measurements and workover activities with wire capacities above 7,650 m  /  25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a fault analytic system. The optional available battery startup makes the system independent of any external power supply.
Schnellansicht
Schließen

Lightweight Wireline Unit

The KOLLER Lightweight Wireline Unit has been designed for workover activities with wire capacities above 7,650 m  /  25,000 ft. The 2-skid layout is separated in a winch / operators container and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The startup by spring starter makes the system independent of any external power supply.
Schnellansicht
Schließen

Bucking Unit 18,500 Nm

The bucking unit have been designed to make and break screwed connections with high torques. The unit is a combination of a KOLLER hydraulic vice 220 kN and a hydraulic operated chain tong. For the basic unit without electronic data logger, no electrical supply is required. Both, the hydraulic vice and the tong are supplied by pressure air driven hydraulic power packs. Since the bucking unit is mounted on a solid steel frame with forklift truck pockets, it is transport friendly and can be moved easily on site.
Schnellansicht
Schließen

Stand 10-350 non-mag

Stands are used for cranless assembly, disassembly and storing of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable. To allow working in an ergonomic position, the height of the stands can be adjusted. Except type 15-350 non-mag, all stands are fitted with transport rollers for move them without load.
Schnellansicht
Schließen

Slickline Alu Unit

The KOLLER Slickline Alu Unit has been designed for workover activities with special weight restrictions. The 2-skid layout is separated in a winch / operators module and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The unit starts with a spring-starter which makes the system independent of any external power supply. The modular system is very flexible enabling a set up with or without cabin. Not using the cabin, more or larger wire can be spooled before the weight restrictions will be executed.
Schnellansicht
Hot
Schließen

Hydro Vice 220 kN

The hydraulic vice have been designed for short-term clamping of downhole tools or other cylindrical workpieces. The 3-point clamping is carried out via a manual spindle and a hydraulically operated prism. The spindle is turned down to the diameter of the workpiece. Then the required clamping force is generated by the hydraulic lifting of the prism. The prism is equipped with specially textured jaws that effectively prevent the workpiece from rotating.
Schnellansicht