Hot
Click to enlarge
Previous product
Rollstuhlschaukel
Back to products
Next product
3-split Offshore Wireline Unit

Offshore Wireline Unit

The KOLLER Offshore Wireline Unit has been designed for measurements and workover activities with wire capacities above 7,650 m  /  25,000 ft. It is suitable for both offshore and onshore applications.

The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a fault analytic system.

The optional available battery startup makes the system independent of any external power supply.

Kategorien: , Branchen: ,
Beschreibung
  • high pull force in combination with a high operation speed
  • high performance along the whole depth
  • KOLLER quick drum change system
  • ergonomically designed operator area
  • pneumatic system startup
  • powerful hydraulic winch system
  • roof flap (winch room) with gas springs
  • parallel-working independent electrical, hydraulic and mechanic backup system on the measuring head
  • lifting eyes and forklift pockets enable easy moving
  • DNV 2.7-1 Frame, third party approval
Technical Data

Technical Data

Options

Options

  • Atex 94/9/EC, Zone II, T3, Gas Group II A
  • winch modul up to 5/16″ braided line for heavy duty fishing
  • integrated pressure and grease control panel
  • electric starter by battery
Downloads

Downloads

Here you can download the Offshore Wireline Unit catalogues.

Media

Media

Heavy Duty Fishing Unit up to 5/16″

Ähnliche Produkte

Schließen

Stand 15-350 non-mag

Stands are used for cranless assembly, disassembly and storing of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable. To allow working in an ergonomic position, the height of the stands can be adjusted. Except type 15-350 non-mag, all stands are fitted with transport rollers for move them without load.
Schließen

Stand 15-200 / 15-300 see specifications

Stands are used for cranless assembly, disassembly and storing of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable. To allow working in an ergonomic position, the height of the stands can be adjusted. Except type 15-350 non-mag, all stands are fitted with transport rollers for move them without load.
Schließen

Lightweight Wireline Unit

The KOLLER Lightweight Wireline Unit has been designed for workover activities with wire capacities above 7,650 m  /  25,000 ft. The 2-skid layout is separated in a winch / operators container and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The startup by spring starter makes the system independent of any external power supply.
Schließen

Washing Plant L-700

The KOLLER Washing Plant L700 is used for degreasing and cleaning of parts or tools. Two programs are available, automatic and manual. For manual cleaning by hand brush the washing table will be lifted to an ergonomic working height. The KOLLER Washing Plant L700 is especially designed environmentally friendly. During the cleaning process the fluid is continuously circulated, filtered and at the end oxygenated with a separate oxygen pump. Therefore its liftime is very long.
Schließen

Trolley 50-200 long / 50-200 see specifications

Trolleys are used for cranless assembly, disassembly and transport of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable and for different tool lengths, the center bar is stepless extendable. To allow working in an ergonomic position, the height of the trolley can be adjusted. Each trolley is grounded and can be used in ESD (electrostatic discharge) environments out of the box. A turnable tray for tooling equipment is optional available.
Schließen

Core Saw

The Koller Core Saw is used to cut the inner tube with drill core into 900 – 1000 mm sections. The conical drums of the connected lay down frame feeds the inner tube to the saw, where an air-powered diamond or corundum saw blade cuts it into the sections described above. The inner tubes can be made of aluminum alloy, fibreglass or heat-treatable steel. In most cases, aluminum tubes are used, so the equipment is optimised to effectively cut filled-core aluminium tubes. The core saw is suitable for offshore and onshore applications
Schließen

Bucking Unit 40,000 Nm

The bucking unit has been designed to make and break screwed connections with high torques. The unit is a combination of a KOLLER hydraulic vice 220 kN and a hydraulic operated chain tong. For the basic unit without electronic data logger, no electrical supply is required. Both, the hydraulic vice and the tong are supplied by pressure air driven hydraulic power packs. Since the bucking unit is mounted on a solid steel frame with forklift truck pockets, it is transport friendly and can be moved easily on site.
Workbench-1700-1
Workbench-1700-4
Schließen

Workbench 1700

The Koller workbenches have been designed to make and break screwed connections with high torques. To accommodate the high torsional forces, the workbenches have extremely stable and torsionally rigid frames. All available workbench equipment is equipped with dovetail mounting plates and are stepless slidable and positionable as well as turnable for 180 degrees in the bench.