Click to enlarge
Previous product
3-split Offshore Wireline Unit
Back to products
Next product
Lightweight Wireline Unit

2-split Offshore Wireline Unit

The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications.

The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a fault analytic system.

The optional available battery startup makes the system independent of any external power supply.

Kategorien: , Branchen: ,
Beschreibung
  • high pull force in combination with a high operation speed
  • high performance along the whole depth
  • KOLLER quick drum change system
  • ergonomically designed operator area
  • pneumatic system startup
  • powerful hydraulic winch system
  • roof flap (winch room) with gas springs
  • parallel-working independent electrical, hydraulic and mechanic backup system on the measuring head
  • lifting eyes and forklift pockets enable easy moving
  • lifting eyes and forklift pockets enable easy moving
  • DNV 2.7-1 Frame, third party approval
Technical Data

Technical Data


Options

Options

  • ATEX 94/9/EC, Zone II 3G IIA T3
  • control equipment with integrated pressure and grease control panel
  • electric starter by battery
  • winch modul up to 5/16“
  • constant speed for winch drive
Downloads

Downloads

Here you can download the 2-split Offshore Wireline Unit catalogue.

Ähnliche Produkte

Schließen

Stand 15-350 non-mag

Stands are used for cranless assembly, disassembly and storing of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable. To allow working in an ergonomic position, the height of the stands can be adjusted. Except type 15-350 non-mag, all stands are fitted with transport rollers for move them without load.
Schließen

Bucking Unit 18,500 Nm

The bucking unit have been designed to make and break screwed connections with high torques. The unit is a combination of a KOLLER hydraulic vice 220 kN and a hydraulic operated chain tong. For the basic unit without electronic data logger, no electrical supply is required. Both, the hydraulic vice and the tong are supplied by pressure air driven hydraulic power packs. Since the bucking unit is mounted on a solid steel frame with forklift truck pockets, it is transport friendly and can be moved easily on site.
Schließen

Trolley 30-200 long

Trolleys are used for cranless assembly, disassembly and transport of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable and for different tool lengths, the center bar is stepless extendable. To allow working in an ergonomic position, the height of the trolley can be adjusted. Each trolley is grounded and can be used in ESD (electrostatic discharge) environments out of the box. A turnable tray for tooling equipment is optional available.
Hot
Schließen

Mobile heavy duty Double Workover Rig 90 tons

  • SISU heavy duty truck with Caterpillar engine, 10x10 drive for extreme off-road capabilities
  • road approval (Germany, Romania) dimensions and weight within the permitted legal limits for special trucks
  • 6 hydraulical supports, mechanically locked
  • 90 tons hook load
  • drawworks with closed-loop cooling and API 7K monogram
  • sand-line drum for 3000 m working depth (higher depths possible)
  • powerful hydraulic by truck engine via Allison transmission 4700 OFS
  • mast with automatic lock in end position (retracted and extended) and API 4F monogram
  • electric safety according to EN 60204
  • automatically uplifting working platform while mast telescoping
  • stairs foldable for transport
  • store capacity for 140 double tubings up to 31/2“
  • turning circle under < 20 m
  • working temperature range -29°C / +45°C (+55°C for special operations)
Hot
Schließen

Hydro Vice 220 kN

The hydraulic vice have been designed for short-term clamping of downhole tools or other cylindrical workpieces. The 3-point clamping is carried out via a manual spindle and a hydraulically operated prism. The spindle is turned down to the diameter of the workpiece. Then the required clamping force is generated by the hydraulic lifting of the prism. The prism is equipped with specially textured jaws that effectively prevent the workpiece from rotating.
Schließen

Stand 15-200 / 15-300 see specifications

Stands are used for cranless assembly, disassembly and storing of downhole tools or other cylindric parts. For different tool diameters, the distance between the support rollers is adjustable. To allow working in an ergonomic position, the height of the stands can be adjusted. Except type 15-350 non-mag, all stands are fitted with transport rollers for move them without load.
Lay-Down-Frame-2
Lay-Down-Frame-1
Schließen

Laydown frame

A perfect tool to ensure safe core samples extraction from the core string on surface. The frame allows to lay down the core samples horizontally without damage, for example directly from the rig floor onto the catwalk. The frame can also be coupled directly to the Core Saw for the core samples to be cut into transportable pieces with protective tube using the saw.
Schließen

Core Saw

The Koller Core Saw is used to cut the inner tube with drill core into 900 – 1000 mm sections. The conical drums of the connected lay down frame feeds the inner tube to the saw, where an air-powered diamond or corundum saw blade cuts it into the sections described above. The inner tubes can be made of aluminum alloy, fibreglass or heat-treatable steel. In most cases, aluminum tubes are used, so the equipment is optimised to effectively cut filled-core aluminium tubes. The core saw is suitable for offshore and onshore applications